No announcement yet.

Pros/Cons of Wheelchair Drives, Please

  • Filter
  • Time
  • Show
Clear All
new posts

    Pros/Cons of Wheelchair Drives, Please

    Would appreciate the pros and cons of front wheel, midwheel, and rear wheel drive wheelchairs - in terms of control, speed, etc. I am especially interested in stability on angles such as tippy curbcuts, going down small inclines, etc. Also, which are best for height/high center of gravity?

    All thoughts and opinions will be much appreciated!

    Holding on to Hope,


    i had a midwheel drive. it was great for tight turning indoors. it did feel kinda tippy when leaning forward since the lil front wheels were off the ground a bit. another downside to me was that it gets hung up a lot outdoors becaause of all the wheels. i couldnt even get up the ramp to my moms house because it was a lil steep. the rear wheel drive i have now will go right up an i havent got stuck anywhere in it. its just a lil trickier manuevering indoors but if you want off road performance i'd have to suggest rear wheel drive.



      As a powerchair user, you know how your powerchair maneuvers indoors. But, do you know why your powerchair has such inherent handling characteristics?

      The answer is, your powerchair maneuvers the way it does because of its drive wheel pivot point. Sure, overall size and user placement influence maneuverability, as well. However, at the heart of maneuverability is the solid science of the pivot point, the absolute design criteria that governs a powerchair's maneuverability. If one wishes to understand powerchair maneuverability, then one must understand the principles and characteristics of a drive wheel pivot point.

      Powerchair drive designations - rear-wheel drive (RWD), front-wheel drive (FWD), and center-wheel drive (CWD) - define the location of the fixed drive wheels. (In today's market, CWD is often used interchangeably with mid-wheel drive (MWD); however, for the sake of clarity, this article will use the CWD designation). Powerchairs are castered vehicles, where fixed drive wheels steer casters that rotate 360-degrees for maneuvering, turning on a defined pivot point. This pivot point is where the drive wheel axle line and the powerbase's centerline intersect, the point around which a powerchair turns and maneuvers.

      On a RWD, the pivot point is rearward, with the majority of the powerchair ahead of the pivot point. On a FWD, the pivot point is forward, with the majority of the powerchair behind the pivot point. And, on a CWD, the pivot point is centered, with the majority of the powerchair atop the pivot point.

      RWD and FWD pivot close to a powerchair's ends, and, as a result, intrinsically swing outward the majority of the powerchair's length when maneuvering in 90- and 180-degree turns, exceeding the powerchair's static diameter. A CWD, on the other hand, pivots on center, remaining within its original static diameter. It's this principle - an offset versus center pivot point - that dictates why RWD and FWD require more space to rotate 90- and 180-degrees (and, ultimately, 360-degrees), than a comparably-sized CWD.

      Although RWD and FWD require greater rotational turning space than a comparably-sized CWD, they can be maneuvered efficiently through skilled operation. However, it's still not possible to rotate a RWD or FWD within its static diameter like a CWD - this is why a CWD is intrinsically the most maneuverable platform in confined diameter spaces.

      Beyond turning diameters, pivot points also dictate handling characteristics in tight, linear spaces, as with maneuvering in hallways.

      In making a 90-degree hallway turn, the front end of a RWD must swing wide, toward wall C, then swing into the doorway, allowing the inside rear wheel to clear wall B. The same scenario in a FWD requires that the front wheels are positioned close to wall B, then pivoted into the doorway, swinging the rear casters close to wall A. For the same maneuver in a CWD, the center of the drive wheel is positioned just beyond wall B, where the powerchair then pivots the front and rear around the door frame, with near equal lengths front and rear, without a long front or rear to swing, readily clearing walls A, B, and C. In halls, as with diameters, a CWD pivot point decreases the space needed for maneuvering over a RWD or FWD.

      A powerchair's overall length, of course, influences maneuverability, and keeping all powerchair platform lengths to a minimum optimizes maneuverability, including CWDs. A 42"-long CWD turns in a smaller diameter than a 44"-long CWD, as holds true for RWD and FWD. Further, seat location in relation to the drive wheels is important, including on CWD, where the goal is to have the drive wheels as centered as possible within the powerchair's true length, from the tip of the footplate or legrest to the rearmost part of the powerchair.

      Beyond subjective adjustments, however, a pivot point is the constant that dictates a powerchair's maneuverability. No matter the length of a powerchair, a CWD pivot point location is more maneuverable than a comparably-sized powerchair with a RWD or FWD pivot point location. Further, a slightly longer CWD can prove more maneuverable than a shorter RWD or FWD. Going back to overall turning diameter, a RWD or FWD requires dramatically more space to pivot, well beyond its overall length, so while an absolute CWD can stay within its overall length (turning within a static diameter), a RWD or FWD cannot - that is, a short RWD still requires more turning space than a slightly longer CWD.

      Beyond the defined pivot point terms, there are individual RWD and FWD, as well as conventional mid-wheel drive (MWD), models with drive wheel pivot points located in positions closer inward or farther outward from the traditional drive wheel pivot point conventions - that is, some models have more optimized drive wheel pivot point locations than others in a given class. However, no matter the individual model, the definitions of RWD, FWD, and CWD pivot points still create the principles that govern fixed drive wheel powerchairs, and dictate that no matter inward our outward pivot points, RWD and FWD still feature offset pivot points in comparison to CWD.

      The maneuverability of RWD, FWD, and CWD powerchairs is predictable and governed, based on fixed drive wheel pivot point locations. It's through understanding the inherent maneuverability characteristics dictated by pivot points that one can fully recognize the distinct handling of rear-, front-, and center-wheel-drive powerchairs.

      Published 12/05, Copyright 2005,
      Emily, C-8 sensory incomplete mom to a 8 year old and a preschooler. TEN! years post.