Announcement

Collapse
No announcement yet.

Dead battery tip

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dead battery tip

    With most of the chairs I've encountered, motorized actuators often complicate battery removal/replacement -- the chair is often in an inconvenient position or orientation to facilitate access to the batteries.

    A trick that I use (as I refurbish a lot of chairs, many of which have toasted batteries by the time I see them) is:
    • open the circuit breaker/fuse to the main battery pack (this effectively disconnects the dead battery from the circuit)
    • supply power to the charger port (but NOT from the charger)
    • operate the actuators (and ONLY the actuators as the wiring to the battery from the charger port is only intended to carry the charging current, not full motor current!)
    • remove power

    I've done this frequently enough on Permobil chairs that I made a little "jig" to simplify the task (I borrow the battery pack out of a UPS to provide the 24VDC). For me, this is much easier than using the "hand crank" to lift the seat (which still leaves the leg rests in an inconvenient position!)

    [I have another trick that uses the existing charger to do this but I fear that's getting too far afield...]
Working...
X