Announcement

Collapse
No announcement yet.

R net function switches

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • R net function switches

    Anyone out there who has taken the R net function switch on Permobils apart? I am going to toke out the toggles and replace them with the push buttons. I have the rubber strip with the push buttons but no instructions. Before I feel my way through the process I thought I would check to see if someone can give me a little guidance.
    You will find a guide to preserving shoulder function @
    http://www.rstce.pitt.edu/RSTCE_Reso...imb_Injury.pdf

    See my personal webpage @
    http://cccforum55.freehostia.com/

  • #2
    That is very easy. Just undo the four screws on the bottom of the unit then lift up the top of the unit. Switch the two rubber strips, then put it back together. I have a parallel swing-out controller, and I think my son was able to get at all four screws without undoing anything. Even if you have to break it down more, it is all very easy. (I have a M400 and an older C500VS)

    Comment


    • #3
      Thanks WheelDon.
      You will find a guide to preserving shoulder function @
      http://www.rstce.pitt.edu/RSTCE_Reso...imb_Injury.pdf

      See my personal webpage @
      http://cccforum55.freehostia.com/

      Comment

      Working...
      X