Announcement

Collapse
No announcement yet.

Chair Measurements

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Chair Measurements

    I'm 6'4" with 32" inseam and I'm looking at 16.5" rear, 19" front seat to floor. My demo chair is 17"/19". I feel I'm sitting just a bit tall. But it's also got 26" wheels and I'm getting 25".

    What you got for your size?

    #2
    What you got for your size?
    Even though I am 5 feet 11 inches i use very small dimension for a tight fit to be free to move.

    13" in wide
    15" in deep
    15" rear seat
    19" front seat
    V style w/ Ergonomic seat
    9" footrest width
    Carbon Fiber back 12"x12" Physipro

    90 degre front frame angle
    0 degre angle
    wheels 24po and 4po semi-pneumatic






    But if it was to begin, I would 1 inch more in length , 16 po in dept instead of 15.

    If you measure 6 feets 4 inches, I'll board 20 inches in front seat

    Comment


      #3
      Originally posted by Ballistika View Post
      If you measure 6 feets 4 inches, I'll board 20 inches in height at the front
      But what is your in-seam? Mine's quite small for my height.

      Comment


        #4
        Originally posted by SirGCal View Post
        I'm 6'4" with 32" inseam and I'm looking at 16.5" rear, 19" front seat to floor. My demo chair is 17"/19". I feel I'm sitting just a bit tall. But it's also got 26" wheels and I'm getting 25".

        What you got for your size?
        I'm 5'8" with 30" inseam. STF 17.5F/15R. 24" wheels. I can stand, so I like my feet close to the floor.
        Chas
        TiLite TR3
        Dual-Axle TR3 with RioMobility DragonFly
        I am a person with mild/moderate hexaparesis (impaired movement in 4 limbs, head, & torso) caused by RRMS w/TM C7&T7 incomplete.

        "I know you think you understand what you thought I said, but what I don't think you realize is that what you heard is not what I meant."
        <
        UNKNOWN AUTHOR>

        Comment


          #5
          But what is your in-seam? Mine's quite small for my height
          Ok I have long legs, my inseam is 29 Po

          Comment


            #6
            I'm 5'11", my stf is 15.5' rear/19" front.what is the in-seam? =/
            walking is OVER-RATED!!!

            Broken in August 14th, 2003. T9-L1 complete.

            Comment


              #7
              You'd be good with 559's for wheels. 24's weere a little small for me. Much better push with the 559's. I use a three inch Nexus cushion and a 19 1/2" fsh with 15 for rear.

              What chair are you getting? If its adjustable don't worry too much on the seat heigths. Tighter width is better than one that's to wide. I notice a big difference between an 18" width and 17. I'm 6'2 seat to footplate is 18"

              Comment


                #8
                Originally posted by nia adha View Post
                I'm 5'11", my stf is 15.5' rear/19" front.what is the in-seam? =/
                Inside-leg. Pants measurement. If someone has a huge or tiny inside-leg, then the chair would be significantly different.

                Originally posted by Patrick Madsen View Post
                You'd be good with 559's for wheels. 24's weere a little small for me. Much better push with the 559's. I use a three inch Nexus cushion and a 19 1/2" fsh with 15 for rear.

                What chair are you getting? If its adjustable don't worry too much on the seat heigths. Tighter width is better than one that's to wide. I notice a big difference between an 18" width and 17. I'm 6'2 seat to footplate is 18"
                Ya, 24"s are too small. 26"s though I think are too big. I hope the 559's (25"s) will be just right.

                The chair I'm getting is the Top End Terminator Titanium. Not horribly adjustable. I'm considering going up to 19.5" front StF but worried about 3" of dump. Maybe I'll bring the rear up to 17". But I don't want to sit too high.

                Comment


                  #9
                  Just to screw with your numbers, I'm 5'2", inseam 34", chair 14"w x 18"d, fstf 18.5, rstf 15.5. Don't pay too much attention to overall height, it's more to do with femour length, eyeline, balance, etc

                  Comment


                    #10
                    Originally posted by amyk View Post
                    Just to screw with your numbers, I'm 5'2", inseam 34", chair 14"w x 18"d, fstf 18.5, rstf 15.5. Don't pay attention to overall height, it's more to do with femour length, eyeliner, balance, etc
                    Exactly! You have a longer inseam than me even. All my height is in my trunk (and big backside) but my legs are smallish for my size. My guess is our seat depth and front stf would be similar (when combined) needs-wise give or take an inch here or there. Since you're actually half inch under what I'm guessing one way and an inch over the other, I'm guessing I'm really close. My biggest fear is to get it too short to be comfortable, but then again too tall to get under tables.

                    Can't wait till I can get a thinner chair though... I'm trying for 19" but I probably should go 20" My backside is so wide... ugg.. I'm shooting for 18" though by the next chair!

                    Comment


                      #11
                      my pants measurement is 33", which includes excessive inches.i'm guessing mine is 29".I hate small sized one because i have wide body, so i'd love to look normal.right now 33" gives me the look i need...=)

                      it also gives my bladder some clearance so it can stock more.

                      i started with an 18" chair.at the time my inseam is 36".
                      so now my inseam is 29, but my left hip is dislocated.that's the reason i used 15".i might be going for 14" on my next order.i keep shrinking.dunno why though..

                      other than a compact chair, i love the normal look.i dont want to look weird in a very compact chair.even a chair with tapered seat (i'm having it right now) looks weird.it does secure my legs better though.
                      walking is OVER-RATED!!!

                      Broken in August 14th, 2003. T9-L1 complete.

                      Comment


                        #12
                        Originally posted by nia adha View Post
                        my pants measurement is 33", which includes excessive inches.i'm guessing mine is 29".I hate small sized one because i have wide body, so i'd love to look normal.right now 33" gives me the look i need...=)

                        it also gives my bladder some clearance so it can stock more.

                        i started with an 18" chair.at the time my inseam is 36".
                        so now my inseam is 29, but my left hip is dislocated.that's the reason i used 15".i might be going for 14" on my next order.i keep shrinking.dunno why though..

                        other than a compact chair, i love the normal look.i dont want to look weird in a very compact chair.even a chair with tapered seat (i'm having it right now) looks weird.it does secure my legs better though.
                        I think you misunderstood the measurement dear. The inside-leg, or inseam is not the waist line, but the measurement from between the legs to the ankle. Or how long the legs of the pants are. It shouldn't change much at all. Waist line would be more meaning of the measurement for the width of the chair. But that's not a reliable one either. My waist is a 44"... (I got fat when I got immobile) but I can still get in a 19" chair. I'm aiming back to get into my 36" Jeans (pants).

                        Something that might help, if they do this over there also, is the pant measurement. The pants I want to wear are 36"x32" which means 36" waist and 32" inseam or inner-leg. Does that help you at all? Sorry this confuses you.

                        Comment


                          #13
                          owh yes!!!sorry for the misunderstanding!

                          so my inseam is actually is 34".haha! thanks sirgcal for clearing that up.
                          walking is OVER-RATED!!!

                          Broken in August 14th, 2003. T9-L1 complete.

                          Comment


                            #14
                            Originally posted by nia adha View Post
                            owh yes!!!sorry for the misunderstanding!

                            so my inseam is actually is 34".haha! thanks sirgcal for clearing that up.
                            Ahh, so you have longer legs then me also... Interesting. What is your chair depth? I know it's 15" wide with a 15.5/19" Seat to Floor but what's the depth? If you don't mind that is.

                            (I have to ask, is that your real picture? Just curious... The look on the picture's face almost makes me blush every time I see it. It has a very pretty smile.)

                            Comment


                              #15
                              no.it's my late wifey....=) passed away last january.thanks for the compliment though.

                              my chair is 15" w x15"+1" depth.basically 15" seat with extra inch frame.
                              walking is OVER-RATED!!!

                              Broken in August 14th, 2003. T9-L1 complete.

                              Comment

                              Working...
                              X