Sorry no pictures just yet as it got delivered after I'd left the shop and our camera is up there. Good fit, although I wish I'd maybe gotten .5 - 1 inch lower RSH. Was hard to tell exactly where I wanted it as the seat sling in the ZRA I was using was sagging so bad and wouldn't stay up that now having a solid seat pan it changed the set up a ton, but still very usable and a much better posture then the sagging sling.
So along with getting used to the different dump from having a solid seat pan, I also gotta get used to it being 1 inch shorter and narrower going from 18x18 to 17x17 as well as going from 80 degree front end to 85. All together it adds up for a different feel that will take a few days to get used to, but not a bad thing.
Couple of things I'm not completely happy with, some from Ti, some from my DME. First off the different sizes of the damn screws/bolts...etc. holding things on. There were some accessories that I don't need on there every day and won't be using all the time so I had planned to take them off. First off is the luggage carriers. Went to take them off and my set of allen wrench's don't fit for them, however they fit everything else on the chair but this one thing. So some of them use SAE sizing while others metric sizes. Why?
I ordered it with 4 inch COG, knowing that I'd have a total of a inch play. I figured that would mean the 4 inch would be right in the middle and I'd have a half inch forward or backward to move my COG. Nope. It's moved all the way up to the last slot. So if wanted to go to 4.25 or 4.5 I wouldn't be able to, I can only move it to less then 4 inches. While it isn't a huge thing as 4 inch's seems to be just right and I don't see myself moving it either way. It just doesn't make sense to me to not put the measurement ordered in the middle of the small adjustment you can go.
Next is my back. Ordered it with a Corbac Ride Design, I went and found my copy of the order form printed off of the TiLite site and used for the order, it was selected. The order ticket shows it to be on there, but it doesn't have one. This I assume should have been put on at TiLite or at least shipped with it? So I blame them, however I also put the blame on my DME as they should have noticed that it wasn't there and informed me they had to get one to replace the stock velcro back it came with.
Next issue was with the DME, I ordered it with D-Locks. It's written in on the orginal order form, I assume that it doesn't come from TiLite that way because it's not on their order form as a option. It didn't have any type of brake selected nor on the order ticket, but it has crappy ass scissor locks that I've already removed(yes my allen wrench set worked for it). Called my DME guy right away to let him know, of course since it's Friday night he can't do anything until Monday morning when he gets to the office.
Another issue with the DME. I ordered with a supracor slimline cushion. Their standard sizes don't include 17 inch, but they do sell em, just takes longer. They had called me Tuesday to let me know they had my chair and it would be delivered later Tues or on Wed. Well they never delivered it, so I called yesterday afternoon and found out they hadn't delivered it because they didn't have my cushion, instead of ordering it at the time they ordered my chair they waited until last week when my chair was shipped. Then of course they found out that they can't get a 17 inch shipped out right away, but instead takes a bit longer. So they knew this on Tuesday, but the office girls and the delivery guys weren't thinking along the same lines. The office girls had figured out I would already have a cushion I could use since I'm in a chair and gave the guys the papers to deliver it, while the delivery guys thought they had to wait until next week for my cushion to come in before they delivered so it sit there from Tuesday until today, when ever after talking to the owner yesterday and being told it would be delivered this morning the delivery guys still didn't load it up this morning. Took another call this afternoon to get em to bring it over so late.
All in all I'm happy with the chair, just a couple of things that are a pain in the ass that shouldn't be with something that cost this much.
Cost shown on the delivery ticket $5990
So along with getting used to the different dump from having a solid seat pan, I also gotta get used to it being 1 inch shorter and narrower going from 18x18 to 17x17 as well as going from 80 degree front end to 85. All together it adds up for a different feel that will take a few days to get used to, but not a bad thing.
Couple of things I'm not completely happy with, some from Ti, some from my DME. First off the different sizes of the damn screws/bolts...etc. holding things on. There were some accessories that I don't need on there every day and won't be using all the time so I had planned to take them off. First off is the luggage carriers. Went to take them off and my set of allen wrench's don't fit for them, however they fit everything else on the chair but this one thing. So some of them use SAE sizing while others metric sizes. Why?
I ordered it with 4 inch COG, knowing that I'd have a total of a inch play. I figured that would mean the 4 inch would be right in the middle and I'd have a half inch forward or backward to move my COG. Nope. It's moved all the way up to the last slot. So if wanted to go to 4.25 or 4.5 I wouldn't be able to, I can only move it to less then 4 inches. While it isn't a huge thing as 4 inch's seems to be just right and I don't see myself moving it either way. It just doesn't make sense to me to not put the measurement ordered in the middle of the small adjustment you can go.
Next is my back. Ordered it with a Corbac Ride Design, I went and found my copy of the order form printed off of the TiLite site and used for the order, it was selected. The order ticket shows it to be on there, but it doesn't have one. This I assume should have been put on at TiLite or at least shipped with it? So I blame them, however I also put the blame on my DME as they should have noticed that it wasn't there and informed me they had to get one to replace the stock velcro back it came with.
Next issue was with the DME, I ordered it with D-Locks. It's written in on the orginal order form, I assume that it doesn't come from TiLite that way because it's not on their order form as a option. It didn't have any type of brake selected nor on the order ticket, but it has crappy ass scissor locks that I've already removed(yes my allen wrench set worked for it). Called my DME guy right away to let him know, of course since it's Friday night he can't do anything until Monday morning when he gets to the office.
Another issue with the DME. I ordered with a supracor slimline cushion. Their standard sizes don't include 17 inch, but they do sell em, just takes longer. They had called me Tuesday to let me know they had my chair and it would be delivered later Tues or on Wed. Well they never delivered it, so I called yesterday afternoon and found out they hadn't delivered it because they didn't have my cushion, instead of ordering it at the time they ordered my chair they waited until last week when my chair was shipped. Then of course they found out that they can't get a 17 inch shipped out right away, but instead takes a bit longer. So they knew this on Tuesday, but the office girls and the delivery guys weren't thinking along the same lines. The office girls had figured out I would already have a cushion I could use since I'm in a chair and gave the guys the papers to deliver it, while the delivery guys thought they had to wait until next week for my cushion to come in before they delivered so it sit there from Tuesday until today, when ever after talking to the owner yesterday and being told it would be delivered this morning the delivery guys still didn't load it up this morning. Took another call this afternoon to get em to bring it over so late.
All in all I'm happy with the chair, just a couple of things that are a pain in the ass that shouldn't be with something that cost this much.
Cost shown on the delivery ticket $5990
Comment