Announcement

Collapse
No announcement yet.

Installing Harddrive

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Installing Harddrive

    I want to install a new harddrive, what I want to know is:

    1. Do I have to format it before I use it.
    2. Can I install it as a slave first, then transfer the data from my old drive to the new one, and then switch
    the slave for the master and use the new drive as the boot up drive.

    If there's anything I've missed let me know.

    Thanks. Jeremy
    "I QUESS THEY'LL HAVE TO RUN OUT OF RATS, BEFORE THEY TRY IT OUT IN HUMANS. WAKE ME UP WHEN IT'S OVER !!!"

    #2
    Formatting a drive is always the first step to using a new one. [img]/forum/images/smilies/smile.gif[/img]

    What you would need to do for what you described is:

    1) Install new hard drive as a slave [by the switch on the drive]
    2) Format the drive [recommended: partition the drive, too]
    3) Copy data from old drive to new drive
    4) Cut off computer [img]/forum/images/smilies/smile.gif[/img]
    5) Flip new drive to Primary
    6) Flip the old drive to slave

    At startup, you may have to adjust your BIOS settings and Windows may have trouble with drive letter assignments, but you can just change them if need be.

    -Steven
    ...it's worse than we thought. it turns out the people at the white house are not secret muslims, they're nerds.

    Comment


      #3
      1. Most likely, yes it will have to be formatted.

      2. Yes, it can be installed as a slave. I would then clean install the OS, then move over your data. It really doesn't make much of a difference whether it's a master or a slave. Really no performance issues, just as long as the two drives are setup as master and slave.

      Comment


        #4
        Thanks Steve one more thing should I use the same cable or attach the new drive too an other IDE slot
        "I QUESS THEY'LL HAVE TO RUN OUT OF RATS, BEFORE THEY TRY IT OUT IN HUMANS. WAKE ME UP WHEN IT'S OVER !!!"

        Comment


          #5
          You can use the same IDE cable if the other slot is available.

          -Steven
          ...it's worse than we thought. it turns out the people at the white house are not secret muslims, they're nerds.

          Comment


            #6
            In my expierence, windows gets unhappy when it's got a newer os on a slave drive.

            Should your new drive be bigger than your old drive, it may be unhappy with it as a slave as well.

            But yes, you've gotta format it. I've never transferred files, just burned them to CD, incase something 'bad' happens, then install the new drive as master, format it, load an os, and reinstall all the files.

            http://krstofer.org
            http://krstofer.org

            Comment


              #7
              Make sure your OS is new enough to handle the new hard drive. The sizes these days are incredible, and older versions of Windows sometimes don't recognize the huge disks we see these days.

              There's a good tool named "partition magic" that will format and partition the new drive for you.

              Also, you might think of a dual boot system if your new disk has a very large capacity. You can leave your old OS on your old drive, and install a new OS on the new disk, and at boot time, you'll be able to select which OS to boot to.

              Good luck
              Please donate a dollar a day at http://justadollarplease.org.
              Copy and paste this message to the bottom of your signature.

              Thanks!

              Comment

              Working...
              X