Up for sale is my Lasher Sport BT-Mg, which I bought new in February 2010. I am getting a new one and will soon have no use for this chair. There is nothing wrong with this chair; it has been great and is much lighter than my previous TiLite chairs. It has normal wear to the front of the down tubes and to the handrims. The bottom of the frame is scratched/worn from taking it apart getting into/out of my car.
The frame color is a very dark charcoal/black metallic. I had everything I could anodized black to match (caps, wheel hubs, D's Locks hub rings). This also has a carbon fiber seat pan, foot plate, and side guards. The D's Locks lever is hidden away under the tubing on the left side. The backrest is the standard tension-cord adjustable one (although I've never had to tighten it; it stays very tight). It has Spinegy LX wheels with black anodized rims and Schwalbe tires, still with plenty of tread. It has Frog Legs Unitine Forks that house 4" x 1.5" casters.
I just replaced the bearings in the casters and also the D's Lock cable. There is nothing mechanically wrong with the chair.
Measurements:
Front seat height: 20.5"
Rear seat height: 17.5"
Depth: 17"
Width: 17"
Camber: 2 degrees
Axle CoG: 2"
Front end: 90 degrees
Foot plate height: 3.23"
Foot width: 10"
Back height: 13"
Back angle: 87 degrees (this is adjustable)
Weight: About 26 lbs with wheels atttached; frame by itself is only about 17 lbs.
No seat cushion included. This chair cost over $8,000 when new. Looking for reasonable offers. Shipping should be around $100 in the continental USA. PM or email me with any questions: Roth517@hotmail.com
Scott
The frame color is a very dark charcoal/black metallic. I had everything I could anodized black to match (caps, wheel hubs, D's Locks hub rings). This also has a carbon fiber seat pan, foot plate, and side guards. The D's Locks lever is hidden away under the tubing on the left side. The backrest is the standard tension-cord adjustable one (although I've never had to tighten it; it stays very tight). It has Spinegy LX wheels with black anodized rims and Schwalbe tires, still with plenty of tread. It has Frog Legs Unitine Forks that house 4" x 1.5" casters.
I just replaced the bearings in the casters and also the D's Lock cable. There is nothing mechanically wrong with the chair.
Measurements:
Front seat height: 20.5"
Rear seat height: 17.5"
Depth: 17"
Width: 17"
Camber: 2 degrees
Axle CoG: 2"
Front end: 90 degrees
Foot plate height: 3.23"
Foot width: 10"
Back height: 13"
Back angle: 87 degrees (this is adjustable)
Weight: About 26 lbs with wheels atttached; frame by itself is only about 17 lbs.
No seat cushion included. This chair cost over $8,000 when new. Looking for reasonable offers. Shipping should be around $100 in the continental USA. PM or email me with any questions: Roth517@hotmail.com
Scott
Comment